Sunflower Bucker L

With a resistant stainless-steel body, powerful engine, and bucking capacity of as much as 60 kg per hour, Bucker L® rapidly speeds up the pre-trimming process. Die holes with four different diameters allow to perfectly buck cannabis flowers of different sizes - from massive outdoor stems to tiny side stems.

Two rotating rubber cylinders inside powered by a strong engine with a powerful gearbox provide enough performance at different speeds to deal with stems of almost any thickness. These two cylinders take the stem through the device with the option to adjust their rotation speed for the optimum processing flow. While the stems are dropped at the end of the process, the flowers are collected into a bin or placed directly on the conveyor IN®.

Technical specifications

• Device size (h,w,d): 136x91x72 cm
• Device weight: 80 kg
• Wet bucking: 60 kg/h
• Input voltage: 230 V
• Input frequency: 50 Hz
• Motor current: 1,4 A
• Motor output: 0.25 kW
• Motor IP rating: 55
• Motor rotation: 1365 min-1
• Gear ratio: 1:10
• Nr. of cylinders: 2
• Nr. of inlets:: 4
• Cylinder diameter: 160 mm
• Rotation range: 50-500